Any chance the Anytone 3318-A will be one of those radios in the future?
Joe M.
On May 14, 2014, at 10:01 AM, John LaMartina JohnLa@usa.net wrote:
Before uploading to CHIRP you must create an initial template by doing a Download From Radio. CHIRP supports over 60 model radios and needs to know which radio it is programming. Make updates to the template and Upload To Radio.
This can be found at http://www.miklor.com/UV5R In the software section.
I hope this helps.
Sent via iPhone6
On May 14, 2014, at 9:04 AM, Adam Brady adamtbrady@cassiausa.com wrote:
Hello and thank you to all who have given their experience here. The issue I am having is that on my CHIRP I have the OFFSET at .600, and the DUPLEX either a + or -. However when I upload this to my radio it does not take the settings. My radio reads OFFSET 00.000 and DUPLEX “none”. I just finished uninstalling, and reinstalling, CHIRP. When I did my initial upload from the radio the settings in CHIRP show the correct OFFSET and DUPLEX in the radio. I tried to find this already reported, but did not.
Adam T. Brady Cassia Engineered Products Corp. 1013 North Parsons Ave. Brandon FL 33510 Online: CASSIAUSA.COM E-mail : adamtbrady@cassiausa.com Office (813) 643 9696 Cell (813) 967 3925
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users