Re: [chirp_users] RE; Connecting to my radio

Try 'dialout' maybe?

On 2017-09-28 10:23 AM, Rick Begeman via chirp_users wrote:

Following the recommendation

rick@rick-GC667AA-ABA-SR5130NX / $ sudo addgroup rick dialup addgroup: The group `dialup' does not exist.

 *



 *




 *





  * Rick Begeman <mailto:bitbungler@yahoo.com>
 *

  * Today at 6:40 AM

To

  * Jim Unroe <mailto:rock.unroe@gmail.com>


  Message body

Thanks Jim

I'm embarrassed I did not find that. I was going at it from the other direction trying to identify which ttyS is assigned to the physical port I am connecting to.

I came up with many answers that gave hardware addresses (bus and device id's) but not which ttyS* that chirp is using to connect.

---

*From:* Jim Unroe *To:* Rick Begeman ; Discussion of CHIRP chirp_users@intrepid.danplanet.com *Sent:* Thursday, September 28, 2017 2:16 AM *Subject:* Re: [chirp_users] Connecting to my radio

On Wed, Sep 27, 2017 at 11:39 PM, Rick Begeman via chirp_users <chirp_users@intrepid.danplanet.com mailto:chirp_users@intrepid.danplanet.com> wrote:

...

See "serial port permissions" on the "Running CHIRP Under Linux" page.

http://chirp.danplanet.com/projects/chirp/wiki/Running_Under_Linux

Jim KC9HI

---

chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Nigel Johnson ve3id at nw.johnson@ieee.org To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com