Try 'dialout' maybe?


On 2017-09-28 10:23 AM, Rick Begeman via chirp_users wrote:
Following the recommendation

rick@rick-GC667AA-ABA-SR5130NX / $ sudo addgroup rick dialup
addgroup: The group `dialup' does not exist.


Message body

Thanks Jim

I'm embarrassed I did not find that.
 
I was going at it from the other direction trying to identify which ttyS is assigned to the physical port I am connecting to.

I came up with many answers that gave hardware addresses (bus and device id's) but not which ttyS* that chirp is using to connect.


From: Jim Unroe
To: Rick Begeman ; Discussion of CHIRP <chirp_users@intrepid.danplanet.com>
Sent: Thursday, September 28, 2017 2:16 AM
Subject: Re: [chirp_users] Connecting to my radio

On Wed, Sep 27, 2017 at 11:39 PM, Rick Begeman via chirp_users
<chirp_users@intrepid.danplanet.com> wrote:
>

See "serial port permissions" on the "Running CHIRP Under Linux" page.

http://chirp.danplanet.com/projects/chirp/wiki/Running_Under_Linux

Jim KC9HI 



_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Nigel Johnson ve3id at nw.johnson@ieee.org
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com

 

-- 
Nigel Johnson
MSc., MIEEE
VE3ID/G4AJQ/VA3MCU

Amateur Radio, the origin of the open-source concept!

http://nigel.homelinux.net
http://va3mcu.ham-radio-op.net

You can reach me by voice on Skype:  TILBURY2591

If time travel ever will be possible, it already is. Ask me again yesterday

This e-mail is not and cannot, by its nature, be confidential. En route from me to you, it will pass across the public Internet, easily readable by any number of system administrators along the way.
   Nigel Johnson <nw.johnson@ieee.org>

    
Please consider the environment when deciding if you really need to print this message