Your correct setting should be Tone Mode = TSQL - this sets CTCSS encode and decode. Tone = 131.8
To my mind, I find CHIRP's CTCSS/DCS configuration very clumsy. It takes up file columns to describe a very simple concept which could easily be covered in three columns.
On Thu, 12 Oct 2023 at 19:34, K0LNY ?? glenn@ervin.email wrote:
Hi, My local repeater uses 131.8 for a PL tone. I at one point had 88.5 in one place and 131.8 in the other. So I changed both to 131.8, and it seems that it should still work, but it isn't keying the repeater. I'm guessing the R in r-tone is for repeater, and the C in C-tone is CTCSS? Anyway, which one of these is the repeater wanting to hear to open up? Thanks.
Glenn A man with a clock always knows what time it is. A man with two clocks is never sure. -- A derivative of Segal's law _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Tony Ling at tonyg7txu@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com