Hi Steve,
First download from the radio to your computer. That will set up the right template for you for that radio. Then fill in the fields and upload to the radio. But make sure when you download to the computer, you're writing into an empty file, not one that data will get erased from.. Hope that helps.
Shon K6QT
Shon R. Edwards, MA, AG (Czech Republic) Amateur call: K6QT 1039 N 2575 W Layton, UT, 84041-7709 USA E-mail: sre.1966@gmail.com Home phone: (801) 444-3445 Cell: (605) 209-6064
On Sun, Mar 29, 2015 at 1:53 PM, Jim Unroe rock.unroe@gmail.com wrote:
On Sun, Mar 29, 2015 at 3:43 PM, Steve Gouveia pctek@pacbell.net wrote:
Hi Jim,
When I go to select the radio type, it only goes up to the UV6D, and I
have an 8D. Can I use the 6D type?
Thank you,
Steve Gouveia pctek@pacbell.net
No. You are most likely using the year old (next month) CHIRP stable build. The support for the KG-UV8D was added in the middle of last year (after the stable build was released) so you need to use a daily build. The latest daily build would be a good place to start. Check the download page for a link.
Jim KC9HI _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com