Hi Steve,

First download from the radio to your computer. That will set up the right template for you for that radio. Then fill in the fields and upload to the radio. But make sure when you download to the computer, you're writing into an empty file, not one that data will get erased from.. Hope that helps.

Shon K6QT

Shon R. Edwards, MA, AG (Czech Republic)
Amateur call: K6QT
1039 N 2575 W
Layton, UT, 84041-7709
USA
E-mail: sre.1966@gmail.com
Home phone: (801) 444-3445
Cell: (605) 209-6064

On Sun, Mar 29, 2015 at 1:53 PM, Jim Unroe <rock.unroe@gmail.com> wrote:

On Sun, Mar 29, 2015 at 3:43 PM, Steve Gouveia <pctek@pacbell.net> wrote:
> Hi Jim,
>
> When I go to select the radio type, it only goes up to the UV6D, and I have an 8D. Can I use the 6D type?
>
> Thank you,
>
> Steve Gouveia
> pctek@pacbell.net

No. You are most likely using the year old (next month) CHIRP stable
build. The support for the KG-UV8D was added in the middle of last
year (after the stable build was released) so you need to use a daily
build. The latest daily build would be a good place to start. Check
the download page for a link.

Jim KC9HI

_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com