If those entries are for repeaters and the repeater requires the tone (PL/CTS/DTCS) then yes the column should have an appropriate entry. If they are simplex frequencies or for repeaters that do not use the tone, then no, it should be blank.
Using libre office it is the same as most spreadsheets. One can copy the cell content desired then mark and paste into the cells to be filled.
Jeff KI7GJG
On Fri, May 19, 2023 at 11:47 PM K0LNY glenn@ervin.email wrote:
Hi, I am working on fixing a couple fields in my CSV file for the Tytera 9800, and I noticed only about half of the cells under "tone" has the word tone in it, the rest are blank. Should I put the word tone in all of them? Will Chirp error if some are missing? And, on this, using Libre Office, is there a way to fill in missing cells with that value in all missing cells, using a keyboard, or would it be easier to fill down a blank column and paste it in over the column with the missing cell values? Thanks.
Glenn _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to sandhillsinvestment@gmail.com at sandhillsinvestment@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com