If those entries are for repeaters and the repeater requires the tone (PL/CTS/DTCS) then yes the column should have an appropriate entry. If they are simplex frequencies or for repeaters that do not use the tone, then no, it should be blank.

Using libre office it is the same as most spreadsheets. One can copy the cell content desired then mark and paste into the cells to be filled.

Jeff

KI7GJG

On Fri, May 19, 2023 at 11:47 PM K0LNY <glenn@ervin.email> wrote:

Hi,

I am working on fixing a couple fields in my CSV file for the Tytera 9800, and I noticed only about half of the cells under "tone" has the word tone in it, the rest are blank.

Should I put the word tone in all of them?

Will Chirp error if some are missing?

And, on this, using Libre Office, is there a way to fill in missing cells with that value in all missing cells, using a keyboard, or would it be easier to fill down a blank column and paste it in over the column with the missing cell values?

Thanks.

Glenn
_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to sandhillsinvestment@gmail.com at sandhillsinvestment@gmail.com
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com