Hi Jim,
Sorry to bother you again.
I have come to the conclusion that I may have a defective cable or the cable is not seating enough to make sufficient contact. I hit the "download from radio" and absolutely nothing happens. The radio is on and the cable is tightly secured (as much as possible). The screen remains blank and I don't get a box to enter any other information. This radio (UV 9R Plus) has a unique cable that differs from other Baofengs.
I'm about ready to send the radio and cable back and buy a different radio. I picked this one because it is waterproof.
You have been very kind with your suggestions.
Thanks again, Paul
On Sun, Sep 6, 2020 at 12:35 PM Jim Unroe rock.unroe@gmail.com wrote:
On Sun, Sep 6, 2020 at 2:29 PM Paul Hansen paulrhans@gmail.com wrote:
Jim,
I'm not getting an error message at all. I don't think the computer is
recognizing the radio.
Thanks for your response.
Paul
Paul,
If you tried to download from your radio and forgot to plug the cable into your radio, you would get an error.
So just close CHIRP (to close the debug.log file), open CHIRP (to start a new debug.log file), attempt a download, and finally close CHIRP.
Now attach the debug.log file.
How to locate the debug.log file for all supported operating systems is in the CHIRP Documentation area. Here is a direct link to the page you need.
https://chirp.danplanet.com/projects/chirp/wiki/How_to_report_issues
Jim KC9HI _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Paul at paulrhans@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com