Well I have tried two different Mac's, and the results is the same, after it finishes cloning the radio the Chirp application crashes. I also tried quitting all other app's but that didn't help. I am open to suggestions.
Thanks for the help.
John N1BSO
John Laiosa
On Tue, Jul 4, 2017 at 9:07 PM, Steve Sergeant stevesgt@effable.com wrote:
Which radio are you trying to connect to. I've see consistent and repeatable crashes on the Mac version when connecting to the Leixen/Luiton/Jetway radios.
On 7/4/17 11:33 AM, David Dixon wrote:
Hi thats an odd one I have a Mac mini and it runs chirp ok every time also the same macOS have you closed all the other program before you start Chirp software
When and update come’s along I remove the old one and move it to the Application folder in Finder and run it from there hope this helps
On 4 Jul 2017, at 15:50, John Laiosa <jlaiosa@gmail.com mailto:jlaiosa@gmail.com> wrote:
After some help from some folks on this users group I was able to get my Mac to recognized the the serial cable. However the problem I am having now is the application crashes after the upload from the radio is complete. I uploaded the latest version of Chirp(20170627) but that did not solved the problem. The Mac is running macOS Sierra version 10.12.5.
Thanks for the help.
John Laiosa N1BSO
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to JohnL at jlaiosa@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@ intrepid.danplanet.com