Well I have tried two different Mac's, and the results is the same, after it finishes cloning the radio the Chirp application crashes.  I also tried quitting all other app's but that didn't help.  I am open to suggestions.

Thanks for the help.

John N1BSO

John Laiosa

On Tue, Jul 4, 2017 at 9:07 PM, Steve Sergeant <stevesgt@effable.com> wrote:
Which radio are you trying to connect to. I've see consistent and
repeatable crashes on the Mac version when connecting to the
Leixen/Luiton/Jetway radios.


On 7/4/17 11:33 AM, David Dixon wrote:
> Hi thats an odd one I have a Mac mini and it runs chirp ok every time
> also the same macOS have you closed all the other program before you
> start Chirp software
>
> When and update come’s along I remove the old one and move it to the
> Application folder in Finder and run it from there hope this helps
>
>> On 4 Jul 2017, at 15:50, John Laiosa <jlaiosa@gmail.com
>> <mailto:jlaiosa@gmail.com>> wrote:
>>
>> After some help from some folks on this users  group I was able to get
>> my Mac to recognized the the serial cable.  However the problem I am
>> having now is the application crashes after the upload from the radio
>> is complete.  I uploaded the latest version of Chirp(20170627) but
>> that did not solved the problem.  The Mac is running macOS Sierra
>> version 10.12.5.
>>
>> Thanks for the help.
>>
>> John Laiosa N1BSO
_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to JohnL at jlaiosa@gmail.com
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com