The trouble with Windows updating drivers come in with programming cables that have fake Prolific chips in them. The latest drivers cause those cables to not work. If Device Manager shows the cable to be a Prolific cable, try rolling back the driver to 3.2.0.0. This driver can be found at Miklor Radio Information Site - Miklor
| | | | | |
|
| | | | Miklor Radio Information Site - Miklor
Miklor Radio Information Site - Miklor | |
|
|
Sent from Yahoo Mail for iPhone
On Monday, May 25, 2020, 13:43, John Mendez john.mendez@sbcglobal.net wrote:
One thing that helped me was to make sure all drivers were updated in Windows Device Manager. There were serial devices that needed to be updated for Chirp to work for me.
John Mendez
-----Original Message----- From: chirp_users-bounces@intrepid.danplanet.com chirp_users-bounces@intrepid.danplanet.com On Behalf Of Clint Bradford Sent: Monday, May 25, 2020 3:16 PM To: chirp_users@intrepid.danplanet.com Subject: Re: [chirp_users] CHIRP Doesn't Work
… Just to be clear, I have tried every Baofeng model currently listed in CHIRP and can't get it to work.
Yet thousands are successfully using CHIRP daily …
After reading the extensive FAQ and Wiki Help information, most “problems” are solved.
Clint Bradford
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to John Mendez at john.mendez@sbcglobal.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Jardy at jardy72@yahoo.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com