Switch to NARROW mode and download your template. You should have the ability for 2.5 steps. If the software doesn't support it which I can think of no reason why, then you can manual program the steps in. Remember with the FT60 you have to recreate the channel structure in VFO mode then overwrite your channel to change.
The FT60 does support 2.5 steps when in narrow mode. How you match that up with programming via Chirp I don't know because I've not done it with software.
Milton.
________________________________ From: Phil - w2lie w2lie@w2lie.net To: chirp_users@intrepid.danplanet.com Sent: Monday, November 25, 2013 8:14 PM Subject: Re: [chirp_users] FT-60r not receiving "on frequency"
Thanks for the advice Milton, but 2.5 isn't supported on this radio. Any other suggestions?
On 11/25/2013 8:08 PM, Milton Hywatt wrote:
Set the step resolution to 2.5 khz. That is if it is available.
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users