Switch to NARROW mode and download your template. You
should have the ability for 2.5 steps. If the software doesn't support
it which I can think of no reason why, then you can manual program
the steps in. Remember with the FT60 you have to recreate the channel
structure in VFO mode then overwrite your channel to change.
The FT60 does support 2.5 steps when in narrow mode. How you match
that up with programming via Chirp I don't know because I've not done it
with software.
Milton.
From: Phil - w2lie <w2lie@w2lie.net>
To: chirp_users@intrepid.danplanet.com
Sent: Monday, November 25, 2013 8:14 PM
Subject: Re: [chirp_users] FT-60r not receiving "on frequency"
Thanks for the advice Milton, but 2.5
isn't supported on this radio.
Any other suggestions?
On 11/25/2013 8:08 PM, Milton Hywatt wrote:
Set the step
resolution to 2.5 khz. That is if it is available.