Thanks for that - Silly question... is there any particular setting in the radio menu that needs to be activated?
Sent from my iPhone
On 21 Nov 2020, at 13:45, straty10 straty10@gmail.com wrote:
I use it on pc to program icom units no issues unless win 10 has done an update which knocks the driver around
Sent from my Galaxy
-------- Original message -------- From: Ken Vernon kennethjv@bigpond.com Date: 21/11/20 13:33 (GMT+10:00) To: Discussion of CHIRP chirp_users@intrepid.danplanet.com Subject: Re: [chirp_users] Programming Baofeng GT3 - Mk11
Have tried wiggling, etc without success .. do you know if this program is better suited to PC or Mac?
Sent from my iPhone
On 21 Nov 2020, at 13:12, Jim Unroe rock.unroe@gmail.com wrote:
Ken,
On Fri, Nov 20, 2020 at 9:02 PM Ken Vernon kennethjv@bigpond.com wrote:
Hey Jim, would it be a fair assumption that if the cable and chirp program works for my gt3tp and uv5r it should be ok for the GT3 mk11?
Yes. Try pressing on the plug a little during the cloning process.
Jim _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Ken at kennethjv@bigpond.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Alan at straty10@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Ken at kennethjv@bigpond.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com