I can also confirm that the IC-80AD doesn't show up in the Chirp: Radio --> "Download from Radio" list (using the 07/30/17 Linux daily). I just tried the auto-detect option but when I tell Chirp to download from the radio (correct serial port, FTDI based cable that's worked on in the past, etc), I'm only getting the following regardless if the radio is sitting in clone mode, I try to initiate clone from the radio then tell Chirp to start, etc.
-- ERROR: --- Exception Dialog: Out of sync with radio --- ERROR: Traceback (most recent call last): File "/home/archive/Chirp/chirp-hg-c56244c58fe8/chirp/ui/clone.py", line 175, in run cs.radio_class = detect.DETECT_FUNCTIONS[vendor](cs.port) File "/home/archive/Chirp/chirp-hg-c56244c58fe8/chirp/detect.py", line 76, in detect_icom_radio result = _detect_icom_radio(ser) File "/home/archive/Chirp/chirp-hg-c56244c58fe8/chirp/detect.py", line 43, in _detect_icom_radio md = icf.get_model_data(ser) File "/home/archive/Chirp/chirp-hg-c56244c58fe8/chirp/drivers/icf.py", line 142, in get_model_data frames = stream.get_frames() File "/home/archive/Chirp/chirp-hg-c56244c58fe8/chirp/drivers/icf.py", line 134, in get_frames return self._process_frames() File "/home/archive/Chirp/chirp-hg-c56244c58fe8/chirp/drivers/icf.py", line 88, in _process_frames raise errors.InvalidDataError("Out of sync with radio") InvalidDataError: Out of sync with radio --
I would assume that once I tell Chirp to start downloading, it would sit there for a while, waiting for me to hit the PTT button on the radio to start sending it's data. What seems to be happening is that Chirp is not waiting and almost instantly errors out. This used to work though I'll admit it's been some time since I've programed this radio.
-- Centos 6.8 GTK 2.24.23 PyGTK 2.24.0 Python 2.6.6 --
--David KI6ZHD
On 07/29/2017 09:08 AM, D.J.J. Ring, Jr. wrote:
Wayne,
You're exactly right.
ICOM IC-80AD is right on the top of ICOM list of supported radios and it's not listed.
However, there is DETECT position in CHIRP.
Have you tried this?
73
DR
On Fri, Jul 28, 2017, 14:23 Wayne Roberts <mrgadgetfl@gmail.com mailto:mrgadgetfl@gmail.com> wrote:
-------- Forwarded Message -------- Subject: Re: [chirp_users] Icom IC-80AD Date: Wed, 26 Jul 2017 17:05:18 -0500 From: Wayne Roberts <mrgadgetfl@gmail.com> <mailto:mrgadgetfl@gmail.com> To: David J. J. Ring, Jr. <n1ea@arrl.net> <mailto:n1ea@arrl.net> CHIRP daily-20170714, Windows 10 (64). Wayne, K4GQS On 7/26/2017 4:59 PM, David J. J. Ring, Jr. wrote:Under About Chirp what version is it and what operating system are you using. The version to use is the DAILY BUILD. 73 David N1EA On July 26, 2017 3:26:38 PM EDT, Wayne Roberts <mrgadgetfl@gmail.com> <mailto:mrgadgetfl@gmail.com> wrote: 73 DR N1EA _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com <mailto:chirp_users@intrepid.danplanet.com> http://intrepid.danplanet.com/mailman/listinfo/chirp_users <http://intrepid.danplanet.com/mailman/listinfo/chirp_users> This message was sent to Wayne atmrgadgetfl@gmail.com <mailto:mrgadgetfl@gmail.com> To unsubscribe, send an email tochirp_users-unsubscribe@intrepid.danplanet.com <mailto:chirp_users-unsubscribe@intrepid.danplanet.com>_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com <mailto:chirp_users@intrepid.danplanet.com> http://intrepid.danplanet.com/mailman/listinfo/chirp_users <http://intrepid.danplanet.com/mailman/listinfo/chirp_users> This message was sent to D.J.J. Ring, Jr. at n1ea@arrl.net <mailto:n1ea@arrl.net> To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com <mailto:chirp_users-unsubscribe@intrepid.danplanet.com>
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to David Ranch at chirp@trinnet.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com