I can also confirm that the IC-80AD doesn't show up in the Chirp: Radio --> "Download from Radio" list (using the 07/30/17 Linux daily).  I just tried the auto-detect option but when I tell Chirp to download from the radio (correct serial port, FTDI based cable that's worked on in the past, etc), I'm only getting the following regardless if the radio is sitting in clone mode, I try to initiate clone from the radio then tell Chirp to start, etc.

--
ERROR: --- Exception Dialog: Out of sync with radio ---
ERROR: Traceback (most recent call last):
  File "/home/archive/Chirp/chirp-hg-c56244c58fe8/chirp/ui/clone.py", line 175, in run
    cs.radio_class = detect.DETECT_FUNCTIONS[vendor](cs.port)
  File "/home/archive/Chirp/chirp-hg-c56244c58fe8/chirp/detect.py", line 76, in detect_icom_radio
    result = _detect_icom_radio(ser)
  File "/home/archive/Chirp/chirp-hg-c56244c58fe8/chirp/detect.py", line 43, in _detect_icom_radio
    md = icf.get_model_data(ser)
  File "/home/archive/Chirp/chirp-hg-c56244c58fe8/chirp/drivers/icf.py", line 142, in get_model_data
    frames = stream.get_frames()
  File "/home/archive/Chirp/chirp-hg-c56244c58fe8/chirp/drivers/icf.py", line 134, in get_frames
    return self._process_frames()
  File "/home/archive/Chirp/chirp-hg-c56244c58fe8/chirp/drivers/icf.py", line 88, in _process_frames
    raise errors.InvalidDataError("Out of sync with radio")
InvalidDataError: Out of sync with radio
--

I would assume that once I tell Chirp to start downloading, it would sit there for a while, waiting for me to hit the PTT button on the radio to start sending it's data.  What seems to be happening is that Chirp is not waiting and almost instantly errors out.  This used to work though I'll admit it's been some time since I've programed this radio.

--
Centos 6.8
GTK 2.24.23
PyGTK 2.24.0
Python 2.6.6
--

--David
KI6ZHD


On 07/29/2017 09:08 AM, D.J.J. Ring, Jr. wrote:

Wayne,

You're exactly right.

ICOM IC-80AD is right on the top of ICOM list of  supported radios and it's not listed.

However, there is DETECT position in CHIRP.

Have you tried this?

73

DR

On Fri, Jul 28, 2017, 14:23 Wayne Roberts <mrgadgetfl@gmail.com> wrote:




-------- Forwarded Message --------
Subject: Re: [chirp_users] Icom IC-80AD
Date: Wed, 26 Jul 2017 17:05:18 -0500
From: Wayne Roberts <mrgadgetfl@gmail.com>
To: David J. J. Ring, Jr. <n1ea@arrl.net>


CHIRP daily-20170714, Windows 10 (64).

Wayne, K4GQS


On 7/26/2017 4:59 PM, David J. J. Ring, Jr. wrote:
Under About Chirp what version is it and what operating system are you using.

The version to use is the DAILY BUILD.

73
David
N1EA

On July 26, 2017 3:26:38 PM EDT, Wayne Roberts <mrgadgetfl@gmail.com> wrote:

73

DR
N1EA


_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Wayne at mrgadgetfl@gmail.com
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to D.J.J. Ring, Jr. at n1ea@arrl.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to David Ranch at chirp@trinnet.net
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com