I know this sounds like "make sure the appliance is plugged in and turned on", but make sure the cable is fully plugged in at both ends and turn the HT up to at least half volume so that it will communicate with the computer. Need to start with the most simple things first.
On Wed, Nov 30, 2016 at 9:46 PM, Bernard Kersefarutz < bernardkersefarutz@gmail.com> wrote:
First time posting on this subscription list. I'm fairly new to radio stuff, just got a handful of ATR-22s off of Amazon by Amcrest.
I am trying to program them through the CHIRP software but to no avail. I keep getting an error message of "No response from radio"
Here's the error in the debug.log [2016-11-30 19:28:00,760] chirp.ui.mainapp - DEBUG: User selected Baofeng BF-888 on port COM3 [2016-11-30 19:28:00,792] chirp.ui.clone - DEBUG: Clone thread started [2016-11-30 19:28:00,792] chirp.drivers.h777 - DEBUG: download [2016-11-30 19:28:01,167] chirp.ui.reporting - DEBUG: Reporting exception [2016-11-30 19:28:01,167] chirp.ui.common - ERROR: -- Exception: -- [2016-11-30 19:28:01,167] chirp.ui.common - ERROR: Traceback (most recent call last): File "chirp\ui\clone.pyo", line 249, in run File "chirp\drivers\h777.pyo", line 288, in sync_in File "chirp\drivers\h777.pyo", line 187, in do_download File "chirp\drivers\h777.pyo", line 109, in _h777_enter_programming_mode RadioError: No response from radio
[2016-11-30 19:28:01,167] chirp.ui.common - ERROR: ---------------- [2016-11-30 19:28:01,167] chirp.ui.clone - ERROR: Clone failed: No response from radio [2016-11-30 19:28:01,276] chirp.ui.clone - DEBUG: Clone thread ended [2016-11-30 19:28:01,276] chirp.ui.reporting - DEBUG: Reporting model usage: Baofeng_BF-888,download,True [2016-11-30 19:28:01,276] chirp.ui.reporting - DEBUG: Reporting exception [2016-11-30 19:28:01,276] chirp.ui.inputdialog - ERROR: --- Exception Dialog: No response from radio --- [2016-11-30 19:28:01,276] chirp.ui.inputdialog - ERROR: Traceback (most recent call last): File "chirpw", line 67, in <module> AttributeError: 'NoneType' object has no attribute 'split'
Would be appreciated if I could get some assistance. Thanks in advance!
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Kent at kent.eichstaedt@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@ intrepid.danplanet.com