Not sure what happens on the radio, what I have tried is to set the offset to off and those frequencies will not import to chirp, I see them when I import, but they are grayed out and con not be selected. I also tried to set off set to split, and the offset frequency to an out of range, as well as tried setting offset to + or - and the offset freq to something like 1000 and I get the same result, can not import the frequencies from the csv to chirp
James Jalbert KC1ECV On Nov 12, 2015 8:14 PM, "Eric Vought" evought@pobox.com wrote:
What happens with this particular radio if you set the transmit frequency to an out-of-range value? 0, -1, 0.1 Mhz, whatever, something that the radio will refuse to transmit on?
On Thu, Nov 12, 2015 at 6:39 PM, James Jalbert kc1ecv@gmail.com wrote:
No big, no miss leading, different radios treat things different
James Jalbert KC1ECV On Nov 12, 2015 7:30 PM, "Gary Runningbear" runningbear2000@gmail.com wrote:
To James KC1ECV, You were right my friend about turning duplex to off to kill the transmit. I guess that particular radio can't be affected by that so now I guess you'll have to set a switch in your own mind do not grab the mic while monitoring those PS channels. Sorry to have misled you but that was a learning point for me and it won't happen again. hi hi
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com