Not sure what happens on the radio, what I have tried is to set the offset to off and those frequencies will not import to chirp, I see them when I import, but they are grayed out and con not be selected. I also tried to set off set to split, and the offset frequency to an out of range, as well as tried setting offset to + or - and the offset freq to something like 1000 and I get the same result, can not import the frequencies from the csv to chirp
James Jalbert
KC1ECV
What happens with this particular radio if you set the transmit frequency to an out-of-range value? 0, -1, 0.1 Mhz, whatever, something that the radio will refuse to transmit on?On Thu, Nov 12, 2015 at 6:39 PM, James Jalbert <kc1ecv@gmail.com> wrote:No big, no miss leading, different radios treat things different
James Jalbert
KC1ECVOn Nov 12, 2015 7:30 PM, "Gary Runningbear" <runningbear2000@gmail.com> wrote:To James KC1ECV,
You were right my friend about turning duplex to off to kill the transmit. I guess that particular radio can't be affected by that so now I guess you'll have to set a switch in your own mind do not grab the mic while monitoring those PS channels. Sorry to have misled you but that was a learning point for me and it won't happen again. hi hi
_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com