Thanks everyone, I figured it out through trial and error.
What Motorola software has as "PL" is DTCS in Chirp. I set up tome mode as DTCS and 664 and it works. Finally.
I'm just learning all this, and it sure would be easier if everyone used the same terms.
jeff
On Wed, Jun 8, 2016 at 11:34 AM, Curley Frazier ricknbrook@gmail.com wrote:
IMO no on the TSQL. That is different than CTCSS. INSTEAD YOU WANT ONLY T-CTCS On Jun 8, 2016 7:27 AM, "Jeffrey" fongemie@gmail.com wrote:
Hey everyone,
I'm pretty new to radios in general, and more so programming them, but I'll do my best to get the terminology right.
I'm trying to use CHIRP to program a UV-5R so that it can communicate with a Motorola radio on a certain frequency. The Motorola is set to use 151.9400 with a PL tone of 67.0 for both send and receive.
PL is the same as CTCSS correct?
On the UV-5R, I've got Tone Mode set as TSQL and ToneSql set to 67.0 - and it does not work? The two radios are not communicating. Am I missing something? Something special about Motorola PL tones? Should be a standard right?
Thanks for any advice.
Jeff
-- ______________
Jeffrey Fongemie
http://instagram.com/jfongemie
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Rick Frazier at ricknbrook@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to fongemie@gmail.com at fongemie@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com