IMO no on the TSQL. That is different than CTCSS.  INSTEAD YOU WANT ONLY T-CTCS

On Jun 8, 2016 7:27 AM, "Jeffrey" <fongemie@gmail.com> wrote:

Hey everyone,

I'm pretty new to radios in general, and more so programming them, but I'll do my best to get the terminology right.

I'm trying to use CHIRP to program a UV-5R so that it can communicate with a Motorola radio on a certain frequency.  The Motorola is set to use 151.9400 with a PL tone of 67.0 for both send and receive.

PL is the same as CTCSS correct?

On the UV-5R, I've got Tone Mode set as TSQL and ToneSql set to 67.0 - and it does not work? The two radios are not communicating.  Am I missing something? Something special about Motorola PL tones? Should be a standard right?

Thanks for any advice.

Jeff

--

______________

Jeffrey Fongemie    

_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Rick Frazier at ricknbrook@gmail.com
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com

_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to fongemie@gmail.com at fongemie@gmail.com
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com