Jim KC9HI
thanks for the fix info I am going to try and remedy the situation. Hopefully I dont screw things up worse than they are. My other issue that I found was when I put the radio on frequency mode it transmit from the newer radio to the older radio but not vice versa. I found that to be rather strange. I am going to look into the info you passed along now. Hopefully I hit you back with good news.
Rick
On Wed, Nov 26, 2014 at 10:20 AM, Jim Unroe rock.unroe@gmail.com wrote:
Rick,
I sound like you tried to program your coworkers radios with an older version of CHIRP and then upgraded. This allowed you to cross-load .img files between radios with N5R firmware and radio with pre-N5R firmware. This should not be done because receive will be muted.
The recovery procedure is on the miklor.com website.
http://www.miklor.com/uv5r/UV5R-Recovery.php#N5R
Jim KC9HI
On Wed, Nov 26, 2014 at 1:14 PM, kcrunchone hill kcrunchone@gmail.com wrote:
I downloaded the new software version and tried to program some of my coworkers radios and they are not functioning. They are not communicating with each other or receiving transmissions from the base either. Prior to the download the software was working just fine. I dont have an older
copy
saved and was curious is there a problem or a fix.
Rick
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users