Jim KC9HI

thanks for the fix info I am going to try and remedy the situation. Hopefully I dont screw things up worse than they are. My other issue that I found was when I put the radio

on frequency mode it transmit from the newer radio to the older radio but not vice versa. I found that to be rather strange. I am going to look into the info you passed along now. Hopefully I hit you

back with good news.

Rick

On Wed, Nov 26, 2014 at 10:20 AM, Jim Unroe <rock.unroe@gmail.com> wrote:

Rick,

I sound like you tried to program your coworkers radios with an older
version of CHIRP and then upgraded. This allowed you to cross-load
.img files between radios with N5R firmware and radio with pre-N5R
firmware. This should not be done because receive will be muted.

The recovery procedure is on the miklor.com website.

http://www.miklor.com/uv5r/UV5R-Recovery.php#N5R

Jim KC9HI

On Wed, Nov 26, 2014 at 1:14 PM, kcrunchone hill <kcrunchone@gmail.com> wrote:
> I downloaded the new software version and tried to program some of my
> coworkers radios and they are not functioning. They are not communicating
> with each other or receiving transmissions from the base either. Prior to
> the download the software was working just fine. I dont have an older copy
> saved and was curious is there a problem or a fix.
>
> Rick

_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users

from tdc to bdc fire is my desire
F I N A O
failure is not an option