Thank you sir. I was doing some reading up on that and printed instructions to do it later. Much appreciated !
On Mar 22, 2017 11:17, "Jim Unroe" rock.unroe@gmail.com wrote:
If you are using a programming cable with a Prolific chip with Windows, then the auto installed driver is incompatible. You must downgrade it to v3.2.0.0. There are instructions on miklor.com
On Mar 22, 2017 9:20 AM, "Nate Alvin" mypersonalspamfilternc@gmail.com wrote:
I am very new to radios and programming. I am trying to program a BF-888S for my business using your software. The radio was purchased a week ago along with Baofeng cable. I get an error message of "radio refused to enter programming mode". I have tried all the Baofeng models listed with similiar results on 2 different laptops. Any help wouldbe appreciated. Thanks
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Jim at rock.unroe@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrep id.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to N.C. at mypersonalspamfilternc@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@ intrepid.danplanet.com