If you are using a programming cable with a Prolific chip with Windows, then the auto installed driver is incompatible. You must downgrade it to v3.2.0.0. There are instructions on miklor.comOn Mar 22, 2017 9:20 AM, "Nate Alvin" <mypersonalspamfilternc@gmail.com > wrote:I am very new to radios and programming. I am trying to program a BF-888S for my business using your software. The radio was purchased a week ago along with Baofeng cable. I get an error message of "radio refused to enter programming mode". I have tried all the Baofeng models listed with similiar results on 2 different laptops. Any help wouldbe appreciated. Thanks
_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Jim at rock.unroe@gmail.com
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to N.C. at mypersonalspamfilternc@gmail.com
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com