For Prolific drivers, look for 3.2.0.0. You can find this at www.miklor.com.
Jardy Dawson WA7JRD Ham Radio
Message sent by... Oh who the heck really cares?
On Apr 21, 2018, at 12:37, Fuchs Ira irafuchs@gmail.com wrote:
My driver looks like this:
USB-Serial Controller:
Product ID: 0x2303 Vendor ID: 0x067b (Prolific Technology, Inc.) Version: 3.00 Speed: Up to 12 Mb/sec Manufacturer: Prolific Technology Inc. Location ID: 0x14600000 / 8 Current Available (mA): 500 Current Required (mA): 100 Extra Operating Current (mA): 0
On Apr 21, 2018, at 2:41 PM, Jean-Paul Louis via chirp_users chirp_users@intrepid.danplanet.com wrote:
OK, Now the only thing left is the USB_Serial driver. Mine shows up on the system info app as
FT232R USB UART:
Product ID: 0x6001 Vendor ID: 0x0403 (Future Technology Devices International Limited) Version: 6.00 Serial Number: AI03E0C2 Speed: Up to 12 Mb/sec Manufacturer: FTDI Location ID: 0x14100000 / 20 Current Available (mA): 500 Current Required (mA): 90 Extra Operating Current (mA): 0
So I loaded the latest FTDI driver from the FTDI website, and everything has been fine since.
A friend of mine had a cheap interface with a chip from Prolific, and I had a heck of a time to find the right driver, but I made it work eventually when I used a driver from Prolific website.
So your mileage might vary.
Good luck, Jean-Paul N1JPL
On Apr 20, 2018, at 11:24 PM, Fuchs Ira irafuchs@gmail.com wrote:
The volume is at max and it still dies about 3/4 of the way to completing the upload.
As far as trying "another Chirp program" due to a driver issue, I’m not sure where that would be found or what to try.
On Apr 20, 2018, at 8:43 PM, Jean-Paul Louis via chirp_users chirp_users@intrepid.danplanet.com wrote:
Ira, Do you have the volume up to the max on the radio? I have seen upload fails when volume is too low
Jean-Paul
On Apr 20, 2018, at 2:42 PM, Ira Fuchs irafuchs@gmail.com wrote:
It’s
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Ira Fuchs at irafuchs@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Jean-Paul Louis at louijp@yahoo.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Ira Fuchs at irafuchs@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Jardy at jardy72@yahoo.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com