For Prolific drivers, look for 3.2.0.0.  You can find this at www.miklor.com

Jardy Dawson
WA7JRD Ham Radio

Message sent by... Oh who the heck really cares?

On Apr 21, 2018, at 12:37, Fuchs Ira <irafuchs@gmail.com> wrote:

My driver looks like this:

USB-Serial Controller:

  Product ID: 0x2303
  Vendor ID: 0x067b  (Prolific Technology, Inc.)
  Version: 3.00
  Speed: Up to 12 Mb/sec
  Manufacturer: Prolific Technology Inc.
  Location ID: 0x14600000 / 8
  Current Available (mA): 500
  Current Required (mA): 100
  Extra Operating Current (mA): 0


On Apr 21, 2018, at 2:41 PM, Jean-Paul Louis via chirp_users <chirp_users@intrepid.danplanet.com> wrote:

OK,
Now the only thing left is the USB_Serial driver.
Mine shows up on the system info app as

FT232R USB UART:

 Product ID: 0x6001
 Vendor ID: 0x0403  (Future Technology Devices International Limited)
 Version: 6.00
 Serial Number: AI03E0C2
 Speed: Up to 12 Mb/sec
 Manufacturer: FTDI
 Location ID: 0x14100000 / 20
 Current Available (mA): 500
 Current Required (mA): 90
 Extra Operating Current (mA): 0

So I loaded the latest FTDI driver from the FTDI website, and everything has been fine since.

A friend of mine had a cheap interface with a chip from Prolific, and I had a heck of a time to find the right driver, but I made it work eventually when I used a driver from Prolific website.

So your mileage might vary.

Good luck,
Jean-Paul
N1JPL


On Apr 20, 2018, at 11:24 PM, Fuchs Ira <irafuchs@gmail.com> wrote:

The volume is at max and it still dies about 3/4 of the way to completing the upload.

As far as trying "another Chirp program" due to a driver issue, I’m not sure where that would be found or what to try.


On Apr 20, 2018, at 8:43 PM, Jean-Paul Louis via chirp_users <chirp_users@intrepid.danplanet.com> wrote:

Ira,
Do you have the volume up to the max on the radio? I have seen upload fails when volume is too low

Jean-Paul


On Apr 20, 2018, at 2:42 PM, Ira Fuchs <irafuchs@gmail.com> wrote:

It’s

_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Ira Fuchs at irafuchs@gmail.com
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com

_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Jean-Paul Louis at louijp@yahoo.com
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com

_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Ira Fuchs at irafuchs@gmail.com
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com

_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Jardy at jardy72@yahoo.com
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com