Have you tried selecting (highlighting) all of the data in all the fields, all the lines, then doing a copy and paste into a blank data form STARTED UP as for the destination radio ?
A quick way to select ALL data in the source data report is to select one line, then type [ctrl]-a (shortcut to select all), then type [ctrl]-c to copy, exit chirp, start it again and read from the destination rig, select one row, do [ctrl]-a again to select all, then paste the copied content from the process before into this ALL selected area by typing [ctrl]-v
You can also pick-n-choose individual records (rows) to transfer by holding the [ctrl] key and clicking the mouse button.
Not sure if this will work for you, but I've used this process to copy from a Baofeng UV82 to a UV5R, and it worked fine.
That will give you the basic frequently data, you'll still need to do any 'settings' directly from the second page
Sent from BlueMail
On Aug 10, 2016, 10:14, at 10:14, Kwas via chirp_users chirp_users@intrepid.danplanet.com wrote:
Hi, I am trying to move Baofeng data to a Yaesu ft-7900R. If I load the Baofeng data into Chirp It selects Baofeng in the upload box and I cannot change it as it is grayed out. Any help anyone can provide will be appreciated.
Thanks, Joe - K5WAS
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to kb6lwn@gmail.com at kb6lwn@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com