I've been putting kenwood QT/DQT enc in the chirp ToneSql, and where kenwood TX and RX are the same, I still put kenwood QT/DQT enc in ToneSql, but don't know if Tone should be TSQL, None, or Tone.
From: "Chirp" chirp_users@intrepid.danplanet.com To: "Chirp" chirp_users@intrepid.danplanet.com Sent: Sunday, April 2, 2017 2:55:07 PM Subject: Re: [chirp_users] Fwd: baofeng 82c
I don't know about that much about Kenwood but these should be correct... Kenwood = Chirp QT encode = Tone QT decode = ToneSql DQT encode = DTCS Code DQT decode = RX DTCS Code
For full explanation of Chirp tone mode menus see... http://chirp.danplanet.com/projects/chirp/wiki/MemoryEditorColumns
It may not be of any help but here is a cross reference between Baofeng and Chirp menus... https://wiki.radioreference.com/index.php/Baofeng_UV-5R#UV-5R_and_UV-82_Menu...
Tom ND5Y
On 04/02/2017 04:37 PM, Jim McIver wrote:
Purchased a baofeng uv-82c as a backup for my kenwood tk-2170. Chirp won't read the tk-2170 so I am trying to match columns from kenwood program to chirp and don't know what goes where. Where can I get help to make the baofeng work?
Attached is what I'm up against. Yes, I've read through all I can find about the baofeng, but lack the knowledge to know all the terminology. Is there a cross reference from kenwood columns to chirp columns?
I think I have rows 0 through 6 correct, but now sure about 7 through 10. That's as far as I've gotten. The rest of the rows came from someone's not in my area.
Q? how can I leave a blank line in the chirp?
Q? Does kenwood QT/DQT Enc go into Chirp ToneSql?
Q? How do I know if TSQL is correct Tone Mode in Chirp or should I be using something else in this column?
Q? Where do I put the 203.5 from kenwood QT/DQT Dec & QT/DQT Enc in Chirp?
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Jim M at jmciver@lmtribune.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com