I've been putting kenwood QT/DQT enc in the chirp ToneSql, and where kenwood TX

 and RX are the same, I still put kenwood QT/DQT enc in ToneSql, but don't know if Tone should be TSQL, None, or Tone.

From: "Chirp" <chirp_users@intrepid.danplanet.com>
To: "Chirp" <chirp_users@intrepid.danplanet.com>
Sent: Sunday, April 2, 2017 2:55:07 PM
Subject: Re: [chirp_users] Fwd: baofeng 82c

I don't know about that much about Kenwood but these should be correct...
Kenwood = Chirp
QT encode = Tone
QT decode = ToneSql
DQT encode = DTCS Code
DQT decode = RX DTCS Code

For full explanation of Chirp tone mode menus see...
http://chirp.danplanet.com/projects/chirp/wiki/MemoryEditorColumns

It may not be of any help but here is a cross reference between Baofeng
and Chirp menus...
https://wiki.radioreference.com/index.php/Baofeng_UV-5R#UV-5R_and_UV-82_Menus_vs_CHIRP_Settings

Tom ND5Y

On 04/02/2017 04:37 PM, Jim McIver wrote:
> Purchased a baofeng uv-82c as a backup for my kenwood tk-2170. Chirp
> won't read the tk-2170 so I am trying to match columns from kenwood
> program to chirp and don't know what goes where. Where can I get help to
> make the baofeng work?
>
> Attached is what I'm up against. Yes, I've read through all I can find
> about the baofeng, but lack the knowledge to know all the terminology.
> Is there a cross reference from kenwood columns to chirp columns?
>
> I think I have rows 0 through 6 correct, but now sure about 7 through
> 10. That's as far as I've gotten. The rest of the rows came from
> someone's not in my area.
>
> Q? how can I leave a blank line in the chirp?
>
> Q? Does kenwood QT/DQT Enc go into Chirp ToneSql?
>
> Q? How do I know if TSQL is correct Tone Mode in Chirp or should I be
> using something else in this column?
>
> Q? Where do I put the 203.5 from kenwood QT/DQT Dec & QT/DQT Enc in Chirp?
_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Jim M at jmciver@lmtribune.com
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com