My driver looks like this:
USB-Serial Controller:
Product ID: 0x2303 Vendor ID: 0x067b (Prolific Technology, Inc.) Version: 3.00 Speed: Up to 12 Mb/sec Manufacturer: Prolific Technology Inc. Location ID: 0x14600000 / 8 Current Available (mA): 500 Current Required (mA): 100 Extra Operating Current (mA): 0
On Apr 21, 2018, at 2:41 PM, Jean-Paul Louis via chirp_users chirp_users@intrepid.danplanet.com wrote:
OK, Now the only thing left is the USB_Serial driver. Mine shows up on the system info app as
FT232R USB UART:
Product ID: 0x6001 Vendor ID: 0x0403 (Future Technology Devices International Limited) Version: 6.00 Serial Number: AI03E0C2 Speed: Up to 12 Mb/sec Manufacturer: FTDI Location ID: 0x14100000 / 20 Current Available (mA): 500 Current Required (mA): 90 Extra Operating Current (mA): 0
So I loaded the latest FTDI driver from the FTDI website, and everything has been fine since.
A friend of mine had a cheap interface with a chip from Prolific, and I had a heck of a time to find the right driver, but I made it work eventually when I used a driver from Prolific website.
So your mileage might vary.
Good luck, Jean-Paul N1JPL
On Apr 20, 2018, at 11:24 PM, Fuchs Ira irafuchs@gmail.com wrote:
The volume is at max and it still dies about 3/4 of the way to completing the upload.
As far as trying "another Chirp program" due to a driver issue, I’m not sure where that would be found or what to try.
On Apr 20, 2018, at 8:43 PM, Jean-Paul Louis via chirp_users chirp_users@intrepid.danplanet.com wrote:
Ira, Do you have the volume up to the max on the radio? I have seen upload fails when volume is too low
Jean-Paul
On Apr 20, 2018, at 2:42 PM, Ira Fuchs irafuchs@gmail.com wrote:
It’s
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Ira Fuchs at irafuchs@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Jean-Paul Louis at louijp@yahoo.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Ira Fuchs at irafuchs@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com