OK,
Now the only thing left is the USB_Serial driver.
Mine shows up on the system info app as
FT232R USB UART:
Product ID:
0x6001
Vendor ID:
0x0403 (Future Technology Devices International Limited)
Version:
6.00
Serial Number:
AI03E0C2
Speed:
Up to 12 Mb/sec
Manufacturer:
FTDI
Location ID:
0x14100000 / 20
Current Available (mA):
500
Current Required (mA):
90
Extra Operating Current (mA):
0
So I loaded the latest FTDI driver from the FTDI website, and everything has been fine since.
A friend of mine had a cheap interface with a chip from Prolific, and I had a heck of a time to find the right driver, but I made it work eventually when I used a driver from Prolific website.
So your mileage might vary.
Good luck,
Jean-Paul
N1JPL
On Apr 20, 2018, at 11:24 PM, Fuchs Ira <irafuchs@gmail.com> wrote:
The volume is at max and it still dies about 3/4 of the way to completing the upload.
As far as trying "another Chirp program" due to a driver issue, I’m not sure where that would be found or what to try.
On Apr 20, 2018, at 8:43 PM, Jean-Paul Louis via chirp_users <chirp_users@intrepid.danplanet.com> wrote:
Ira,
Do you have the volume up to the max on the radio? I have seen upload fails when volume is too low
Jean-Paul
On Apr 20, 2018, at 2:42 PM, Ira Fuchs <irafuchs@gmail.com> wrote:
It’s
_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Ira Fuchs at irafuchs@gmail.com
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Jean-Paul Louis at louijp@yahoo.com
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.comhttp://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Ira Fuchs at irafuchs@gmail.com
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com