22 Jan
2016
22 Jan
'16
7:55 a.m.
You need to watch it to... Sometimes it will bounce to /dev/ttyUSB1 depending on what is plugged in when you plug that cable in.
On Fri, Jan 22, 2016 at 10:42 AM, jon engineergrosjean@gmail.com wrote:
I spent a lot of time trying to get my Linux computers to read from my Wouxun radio using both the Wouxun programming cable and an Ftdi1232 board and got a serial port error message. My mistake was selecting dev/ttyS0. You need to select dev/ttyUSB0 way down at the end of the tty list. _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com