OK... I'm dyin' here guys... Be sure you have a pencil handy for those C-Tapes. Ya GOTTA have the right tension...
Sent from BlueMail
On Aug 6, 2016, 15:03, at 15:03, Jardy Dawson via chirp_users chirp_users@intrepid.danplanet.com wrote:
Only for TRS-80 Model 1 cassette tape. Jardy Dawson WA7JRD Ham Radio
Message relayed through The Senior Boston Relay Race baton pass.
On Aug 6, 2016, at 14:29, Bob Nielsen n7xy@n7xy.net wrote:
Is there an app to convert a tarball to punch cards or paper tape?
On 8/6/16 2:20 PM, John LaMartina wrote: Al, Does Autocoder (1401) SPS, and ALC ring a bell? Sure beat the 1620 plug board… :- )
From: chirp_users-bounces@intrepid.danplanet.com
[mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of Al Jones
Sent: Saturday, August 06, 2016 4:44 PM To: 'Discussion of CHIRP' Subject: Re: [chirp_users] Updating Chirp for the UV-82HP
Laughing at you Bruce., from your list of programming languages, that
should date you date about my 70ish (or so).
My list looks like: ASM, APL, BASIC (of way too many varieties to
count), C, COBOL, FORTRAN, RPG (ugh!), and I'm sure others ... sure would be nice is things were as simple as they were in the old day .... << smile >>
//al
From: chirp_users-bounces@intrepid.danplanet.com
[mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of Bruce LeGrande
Sent: Saturday, August 6, 2016 15:17 To: Chirp-Users List Subject: Re: [chirp_users] Updating Chirp for the UV-82HP
And I thought v0.4.0 was ancient... lol I am still receiving the SAME error with v0.4.1 I have downloaded chirp-daily-20160802.tar.gz Sitting in '~/.install' directory Next step please ? <=====
I can't believe this seems like so much of a process. I've set up Cat-5 Ether and wireless networks from Slack v3.2 on up to v7, written and compiled source on various distros, without major problems. Coded in ASM, Fortran, Pascal, CoBOL, BASIC, and others. Can't understand why this isn't flowing better...
But at this point I'm not assuming ANYthing... I'm going to ASK, even is sounds like a silly question. After the download, what is the next step ?
Sent from BlueMail
On Aug 4, 2016, at 23:29, Bob Nielsen n7xy@n7xy.net wrote: Unfortunately 0.4.1 is ancient. Get the latest tarball version at
http://trac.chirp.danplanet.com/chirp_daily/LATEST/.
73, Bob N7XY
On 8/4/16 11:13 PM, Bruce LeGrande wrote:
Downloaded: chirp-0.4.1.tar.gz Got v0.4.1 to run. Tried to overlay the daily (0802) and re-run, but got the same errors
as before.
UV-82HP is in the truck, will bring it in and try to reprogram it
tomorrow.
73 4 now
Sent from BlueMail
On Aug 4, 2016, at 14:28, W Paul Mills AC0HY@WPMills.com wrote: Chirp does not need compiling, just download tarball and unpack.
Enter
the directory where unpacked and run ./chirpw
See: http://chirp.danplanet.com/projects/chirp/wiki/Running_Under_Linux
On 08/02/2016 08:11 PM, Bruce LeGrande wrote:
Yup... I guess I left out the most important fact responsible for the error message, which is the OS on the NetBook is Debian Squeeze v6, to
which
doing a major update to is not an option. Have tried installing the latest version of Chirp under that, but
there
are just too many errors in compile making that not feasible. And
since
there is no .Deb distribution package available, compiling source is
the
only option.
That was my main reason for becoming interes ted in a LiveBoot
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Jardy at jardy72@yahoo.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to kb6lwn@gmail.com at kb6lwn@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com