you can select all the lines to change. right click and select propeties. in the box popup, tick the 3rd line, tone mode and select off, or to what suits. and ok it.
this will change what you want.
________________________________ From: chirp_users-bounces@intrepid.danplanet.com chirp_users-bounces@intrepid.danplanet.com on behalf of Joe Hobart nova@npgcable.com Sent: 09 April 2018 16:25 To: chirp_users@intrepid.danplanet.com Subject: [chirp_users] Wouxun KG-UV8D Won't Open Squelch
I still cannot get the Wouxun KG-UV8D to program properly. I have tried both Windows 10 and Linux versions of Chirp with similar results. This problem persists with three different radios.
A possible clue: After programming the radio, I manually go to the R-DCS menu item and change D77I to OFF; that channel then immediately starts working and opens the squelch on receive.
How do I tell Chirp to set R-DCS to OFF for all channels?
Here are the first few channels from the CSV file:
Location Name Frequency Duplex Offset Tone rToneFreq cToneFreq DtcsCode DtcsPolarity Mode TStep Skip
1 146.52 146.52 0 88.5 88.5 23 NN FM 5
2 446 446.6 - 5 88.5 88.5 23 NN FM 5
3 144.39 144.39 0 88.5 88.5 23 NN FM 5
4 144.01 145.01 0 88.5 88.5 23 NN FM 5
5 146.98 146.98 - 0.6 Tone 162.2 88.5 23 NN FM 5
One of the user group members suggested I post the file to the group. How do I do that??? I do not see any instructions about posting files.
Thanks, Joe, W7LUX _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com https://eur03.safelinks.protection.outlook.com/?url=http%3A%2F%2Fintrepid.da... This message was sent to m1cfk at ne.b@hotmail.co.uk To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com