I still cannot get the Wouxun KG-UV8D to program properly.  I have tried both
Windows 10 and Linux versions of Chirp with similar results.  This problem
persists with three different radios.

A possible clue: After programming the radio, I manually go to the R-DCS menu
item and change D77I to OFF; that channel then immediately starts working and
opens the squelch on receive.

How do I tell Chirp to set R-DCS to OFF for all channels?

Here are the first few channels from the CSV file:

Location        Name    Frequency       Duplex  Offset  Tone    rToneFreq       cToneFreq       DtcsCode
DtcsPolarity    Mode    TStep   Skip

1       146.52  146.52          0               88.5    88.5    23      NN      FM      5      

2       446     446.6   -       5               88.5    88.5    23      NN      FM      5      

3       144.39  144.39          0               88.5    88.5    23      NN      FM      5      

4       144.01  145.01          0               88.5    88.5    23      NN      FM      5      

5       146.98  146.98  -       0.6     Tone    162.2   88.5    23      NN      FM      5      


One of the user group members suggested I post the file to the group.  How do I
do that???  I do not see any instructions about posting files.

Thanks,
Joe, W7LUX
_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
https://eur03.safelinks.protection.outlook.com/?url=http%3A%2F%2Fintrepid.danplanet.com%2Fmailman%2Flistinfo%2Fchirp_users&data=02%7C01%7C%7C72a63b3e45e3408e46d708d59e2e2290%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636588843336504838&sdata=iKU7LIWIkvOMp9fpyhqZX1Dcgj%2BKhUVsWki6MNpFRDM%3D&reserved=0
This message was sent to m1cfk at ne.b@hotmail.co.uk
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com