Marty, nope, I don't think anyone CAN unsubscribe you ... but you can unsubscribe yourself.
At the bottom of each message there's an unsub link, it looks like this: To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
If you use it you won't get any more messages and you won't be sending messages that ask others what you can do yourself.
------ Original Message ------
From "Martin McInerney" m.mcinerney24@gmail.com
To "Discussion of CHIRP" chirp_users@intrepid.danplanet.com Date Fri 1 6 23 19:33:24 Subject Re: [chirp_users] Novel solution to Baofeng UV-5R's "Radio did torespond" problem?
Would someone please unsubscribe me or remove me from their email lists from these notifications... This message was sent to Marty McInerney at m.mcinerney24@gmail.com Best, Marty
On Fri, Jan 6, 2023 at 4:22 PM The Doctor drwho@virtadpt.net wrote:
------- Original Message ------- On Friday, January 6th, 2023 at 09:55, K0LNY_Glenn glenn@ervin.email wrote:
Another approach is to bevel the four edges with a pocket knife, affectively making the insertion piece a bit smaller, because it may not be the flat surface that is the problem, but the outer diameter of the plug
That is what I wound up doing (I used a Dremel and a rattail file) and it solved the problem nicely.
The Doctor [412/724/301/703/415/510] WWW: https://drwho.virtadpt.net/ The old world is dying, and the new world struggles to be born. Now is the time of monsters.
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Marty McInerney at m.mcinerney24@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
-- Marty McInerney
Charlotte, NC 704-534-6726 m.mcinerney24@gmail.com