Marty, nope, I don't think anyone CAN unsubscribe you ... but you can unsubscribe yourself.

At the bottom of each message there's an unsub link, it looks like this:
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com

If you use it you won't get any more messages and you won't be sending messages that ask others what you can do yourself.



------ Original Message ------
From "Martin McInerney" <m.mcinerney24@gmail.com>
To "Discussion of CHIRP" <chirp_users@intrepid.danplanet.com>
Date Fri 1 6 23 19:33:24
Subject Re: [chirp_users] Novel solution to Baofeng UV-5R's "Radio did torespond" problem?

Would someone please unsubscribe me or remove me from their email lists from these notifications... This message was sent to Marty McInerney at  m.mcinerney24@gmail.com
Best,
Marty

On Fri, Jan 6, 2023 at 4:22 PM The Doctor <drwho@virtadpt.net> wrote:
------- Original Message -------
On Friday, January 6th, 2023 at 09:55, K0LNY_Glenn <glenn@ervin.email> wrote:

Another approach is to bevel the four edges with a pocket knife, affectively making the insertion piece a bit smaller, because
 it may not be the flat surface that is the problem, but the outer diameter of the plug

That is what I wound up doing (I used a Dremel and a rattail file) and it solved the problem nicely.

The Doctor [412/724/301/703/415/510]
The old world is dying, and the new world struggles to be born. Now is the time of monsters.

_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Marty McInerney at m.mcinerney24@gmail.com
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com


--
Marty McInerney

Charlotte, NC
704-534-6726