I can pull up the Diagram, but that's it
On Tue, May 14, 2019, 11:10 PM Dan Jolley <oldhippie1955@yahoo.com wrote:
Chirp is the best, I've always used it. Make sure the COM PORT in the Device Manager is the same as Chirp. That is the only thing I can think of that would keep Chirp from working.
*>>>The only other option that I can think of is that you have a bad UV-82, can you try it on someone else's computer that has Chirp working?<<<*
Everything everybody has suggested should have worked.
While you're at it, go back into Device Manager, right click the COM PORT, and tell it to Update The Driver. (It's can't hurt at this point!)
On Tuesday, May 14, 2019, 9:58:55 PM CDT, Billy Shirer < bshirer80@gmail.com> wrote:
Is there any other download software that I can use to program my boo Fame uv-82
On Tue, May 14, 2019, 10:58 PM Billy Shirer <bshirer80@gmail.com wrote:
Com 3
On Tue, May 14, 2019, 10:48 PM Nigel A. Gunn G8IFF/W8IFF <nigel@ngunn.net wrote:
That's unlikely to be Chirp.
More likely your device driver installation. Which COM port does your device manager say that your cable is using?
On 14 May 2019 at 22:38 Billy Shirer bshirer80@gmail.com wrote:
No matter how I do it, it still ISN'T working
On Tue, May 14, 2019, 10:37 PM Billy Shirer < bshirer80@gmail.com wrote:
Nope, Chirp Sucks
On Tue, May 14, 2019, 10:00 PM Dan Jolley via chirp_users < chirp_users@intrepid.danplanet.com wrote:
Is it working now? Or still having problems?
Dan
On Tuesday, May 14, 2019, 8:32:54 PM CDT, Billy Shirer < bshirer80@gmail.com> wrote:
Ok
On Tue, May 14, 2019, 9:14 PM Glenn At Home < GlennErvin@cableone.net wrote:
I usually select the USB option, which is at the bottom of the list. Glenn ----- Original Message ----- *From:* Billy Shirer bshirer80@gmail.com *To:* Dan Jolley oldhippie1955@yahoo.com ; Discussion of CHIRP chirp_users@intrepid.danplanet.com *Cc:* Jardy jardy72@yahoo.com *Sent:* Tuesday, May 14, 2019 7:54 PM *Subject:* Re: [chirp_users] Baofeng-uv82
I only have 3 Comm Ports
On Tue, May 14, 2019, 8:46 PM Dan Jolley via chirp_users < chirp_users@intrepid.danplanet.com wrote:
Billy, sometimes Windows changes them back from 3.2.0.0. Check your COM PORT and make sure it is on COM5.
On Tuesday, May 14, 2019, 7:39:19 PM CDT, Billy Shirer < bshirer80@gmail.com> wrote:
Okay, I will try that. Thanks
On Tue, May 14, 2019, 7:44 PM Jardy via chirp_users < chirp_users@intrepid.danplanet.com wrote:
Those cables can still be used if you roll the drivers back. Usually hits Prolific cables, use driver 3.2.0.0. No problems.
Jardy Dawson WA7JRD Message sent through sub space hailing frequencies using the Universal Translator.
On May 14, 2019, at 14:58, Steve Thomas < stevet@alertcpr.com> wrote:
Is it a new cable? There are a lot of cables out there that have bad chips that used to work but don't work with newer versions of the Windows 10 driver. And since Windows 10 automatically updates the drivers, some cables that used to work quit along the way. On 5/14/2019 4:17 PM, Billy Shirer wrote:
Yes, and again nothing happened
On Tue, May 14, 2019, 5:12 PM Glenn At Home < GlennErvin@cableone.net wrote:
Did you try to download from your radio first?
----- Original Message ----- *From:* Billy Shirer bshirer80@gmail.com *To:* Discussion of CHIRP chirp_users@intrepid.danplanet.com *Sent:* Tuesday, May 14, 2019 4:03 PM *Subject:* Re: [chirp_users] Baofeng-uv82
I windows 10
I downloaded the Chirp Software and I connected my cable to my laptop and opened the download and proceeded to program my radio and the a window opened and said......No file found
On Tue, May 14, 2019, 4:41 PM Glenn At Home < GlennErvin@cableone.net wrote:
What is your OS? What have you tried so far?
----- Original Message ----- *From:* Billy Shirer bshirer80@gmail.com *To:* chirp_users@intrepid.danplanet.com *Sent:* Tuesday, May 14, 2019 3:22 PM *Subject:* [chirp_users] Baofeng-uv82
I downloaded Chirp for my baofeng-uv82 and I can't get it Programmed
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Glenn at glennervin@cableone.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Billy Shirer at bshirer80@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Glenn at glennervin@cableone.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Billy Shirer at bshirer80@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing listchirp_users@intrepid.danplanet.comhttp://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Steve Thomas at stevet@alertcpr.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
-- Steve Thomas, EMT-P Executive Director AlertCPR Emergency Training & Supply Office 866-569-7139 Cell 214-912-7690Stevet@alertcpr.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Jardy at jardy72@yahoo.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Billy Shirer at bshirer80@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Dan Jolley at oldhippie1955@yahoo.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Billy Shirer at bshirer80@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Glenn at glennervin@cableone.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Billy Shirer at bshirer80@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Dan Jolley at oldhippie1955@yahoo.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Billy Shirer at bshirer80@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Nigel Gunn, W8IFF at nigel@ngunn.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
Nigel A. Gunn, 1865 El Camino Drive, Xenia, OH 45385-1115, USA. tel +1 937 825 5032 Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel@ngunn.net www http://www.ngunn.net