Since I had no success with the IC-T70A and MacOS, I turned to my Raspberry PI 3 with Raspbian. I had to issue the permissions commands under: https://chirp.danplanet.com/projects/chirp/wiki/Running_Under_Linux
I ended up just downloading the current tar file. Just in case you have the same issue, the Raspbian python gtk package is called pygtk2. Good luck. On Thu, Oct 4, 2018 at 12:31 PM Aubrey Turner aubrey.c.turner@gmail.com wrote:
Make sure you log and and log back in after making the change. Changes to Linux groups don't get applied until you log in.
On 10/04/2018 02:26 PM, clayton_k4qm@sc.rr.com wrote:
I am very new to this program and am using Linux Mint. Could some one
advise me how to set up the comm port?
I tried to set up dialout with my user name but for some reason, didn't
take
Thanks Clayton K4QM _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Aubrey Turner at aubrey.c.turner@gmail.com To unsubscribe, send an email to
chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to frankB at thereur@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com