Mike,
You can change it manually by going into the menu and changing item 14, VOICE. The procedure to change menu items is in the manual.
Beset Regards, Dennis, N8ERF On May 21, 2014 11:28 PM, "Michael Clark" mpjjm0101@msn.com wrote:
When entering my one and only repeater frequency, offset, TX, RX, etc., the language changed from English to Chinese. How do I change it back to English? Can't seem to find the commands in the booklet. Radio receives and transmits fine.
Mike in Burien, KG7LRF, new technician class licensee
From: chirp_users-request@intrepid.danplanet.com Subject: chirp_users Digest, Vol 65, Issue 16 To: chirp_users@intrepid.danplanet.com Date: Wed, 21 May 2014 12:00:02 -0700
Send chirp_users mailing list submissions to chirp_users@intrepid.danplanet.com
To subscribe or unsubscribe via the World Wide Web, visit http://intrepid.danplanet.com/mailman/listinfo/chirp_users or, via email, send a message with subject or body 'help' to chirp_users-request@intrepid.danplanet.com
You can reach the person managing the list at chirp_users-owner@intrepid.danplanet.com
When replying, please edit your Subject line so it is more specific than "Re: Contents of chirp_users digest..."
Today's Topics:
- Cable (Richard Mogford)
- Re: Cable (Richard Mogford)
- Re: Cable (Nate Perkins)
- Re: Summer Project : transcoding CHIRP (W Paul Mills)
Message: 1 Date: Tue, 20 May 2014 22:26:57 -0700 From: "Richard Mogford" rchrdm@earthlink.net Subject: [chirp_users] Cable To: chirp_users@intrepid.danplanet.com Message-ID: 000501cf74b5$49d2d450$dd787cf0$@earthlink.net Content-Type: text/plain; charset="us-ascii"
I am new to this list and probably am making mistakes that are already
well
known!
I bought a cheap cable running the 2303 chip, which I found later is not
so
good.
The drivers on the supplied CD seem to work OK, but when I go to use
CHIRP,
I get an "Error Occurred" message saying "could not open port COM3:
[Error
2] The system cannot find the file specified."
Is there anything I can try here, or should I just shop for a better
cable?
Richard
Message: 2 Date: Tue, 20 May 2014 22:52:11 -0700 From: "Richard Mogford" rchrdm@earthlink.net Subject: Re: [chirp_users] Cable To: "'Discussion of CHIRP'" chirp_users@intrepid.danplanet.com Message-ID: 000e01cf74b8$cfa78320$6ef68960$@earthlink.net Content-Type: text/plain; charset="us-ascii"
Well, I got it working by reading the instructions on the CHIRP web site. It suggested downloading a driver from the 409shop.com web site, which I did. Amazingly, the cheap (about $4 including shipping) worked!
Richard
-----Original Message----- From: chirp_users-bounces@intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of Richard Mogford Sent: Tuesday, May 20, 2014 10:27 PM To: chirp_users@intrepid.danplanet.com Subject: [chirp_users] Cable
I am new to this list and probably am making mistakes that are already
well
known!
I bought a cheap cable running the 2303 chip, which I found later is not
so
good.
The drivers on the supplied CD seem to work OK, but when I go to use
CHIRP,
I get an "Error Occurred" message saying "could not open port COM3:
[Error
2] The system cannot find the file specified."
Is there anything I can try here, or should I just shop for a better
cable?
Richard
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users
Message: 3 Date: Tue, 20 May 2014 22:10:31 -0800 From: Nate Perkins perkins.nc@gmail.com Subject: Re: [chirp_users] Cable To: Discussion of CHIRP chirp_users@intrepid.danplanet.com Message-ID: 2F696FA0-8CF9-4DD5-82F6-2EBF6873EC93@gmail.com Content-Type: text/plain; charset=us-ascii
I would suggest just tossing the idea of using whatever driver you got
on the supplied CD. I ordered a cable and disc set off of Amazon, threw the disc out, downloaded everything off of CHIRP, plugged in my cable, and it went flawless. Not one hitch. This was a Baofeng UV-82. CHIRP rocks!
Nate, KL3NP Nome, Alaska
On May 20, 2014, at 9:26 PM, Richard Mogford wrote:
I am new to this list and probably am making mistakes that are already
well
known!
I bought a cheap cable running the 2303 chip, which I found later is
not so
good.
The drivers on the supplied CD seem to work OK, but when I go to use
CHIRP,
I get an "Error Occurred" message saying "could not open port COM3:
[Error
2] The system cannot find the file specified."
Is there anything I can try here, or should I just shop for a better
cable?
Richard
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users
Message: 4 Date: Wed, 21 May 2014 08:34:46 -0500 From: W Paul Mills AC0HY@WPMills.com Subject: Re: [chirp_users] Summer Project : transcoding CHIRP To: chirp_users@intrepid.danplanet.com Message-ID: 537CAB76.9090209@WPMills.com Content-Type: text/plain; charset=ISO-8859-1
Not exactly true. With Windows 8 Prolific has announced that certain common chips will not be supported at all, and they seem to be getting better at preventing the old drivers from working. I have a genuine ICOM cable that recently fell victim to this.
On 05/20/2014 10:54 AM, Niklas Johnson wrote:
Its wrong only if you have a 'counterfeit' Prolific chip, the most recent driver revisions that Prolific themselves provided to Microsoft detects and disables the non-genuine variants. Prolific is protecting their market share and IP, and Microsoft was providing a certified manufacturer supplied driver.
On Tue, May 20, 2014 at 8:41 AM, Pete Mackie <pete@seaquest.com mailto:pete@seaquest.com> wrote:
Except starting with Mac OS X Mavericks Apple is providing an O/S built in USB to serial driver. I am using the Apple provided USB to serial driver with CHIRP with zero problems.
Windows has provides an O/S built in USB serial driver. The dilemma is the stupid Microsoft thinks they should automatically provide the latest O/S built in USB serial driver. And that is absolutely the wrong thing to do if you are using a Prolific USB / serial cable.
Pete
On May 20, 2014, at 8:17 AM, Andrew <ziltro@ziltro.com mailto:ziltro@ziltro.com> wrote:
The drivers for certain USB/serial adapter cables will still be required, and they seem to be the main thing causing problems on Windows and Mac OS.
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com mailto:chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users
--
Best regards,
Niklas Johnson / Tech Rugged Radios 951 E. Grand Avenue Arroyo Grande, CA 93420 toll free (888) 541-7223 local (805) 541-1696
Follow Rugged Radios at: Rugged Radios http://www.ruggedradios.com/ Facebook http://www.facebook.com/rugged.radios Instagram http://instagram.com/ruggedradios YouTube http://www.youtube.com/ruggedradios Twitter https://twitter.com/ruggedradios
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users
-- /*************************************************
- Amateur Radio Station AC0HY *
- W. Paul Mills SN807 *
- Assistant EC Alpha-1 ARES Shawnee/Wabunsee, KS *
- President Kaw Valley Amateur Radio Club *
*************************************************/
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users
End of chirp_users Digest, Vol 65, Issue 16
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users