When entering my one and only repeater frequency, offset, TX, RX, etc., the language changed from English to Chinese.  How do I change it back to English?  Can't seem to find the commands in the booklet.  Radio receives and transmits fine.

Mike in Burien, KG7LRF, new technician class licensee

> From: chirp_users-request@intrepid.danplanet.com
> Subject: chirp_users Digest, Vol 65, Issue 16
> To: chirp_users@intrepid.danplanet.com
> Date: Wed, 21 May 2014 12:00:02 -0700
>
> Send chirp_users mailing list submissions to
> chirp_users@intrepid.danplanet.com
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> or, via email, send a message with subject or body 'help' to
> chirp_users-request@intrepid.danplanet.com
>
> You can reach the person managing the list at
> chirp_users-owner@intrepid.danplanet.com
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of chirp_users digest..."
>
>
> Today's Topics:
>
> 1. Cable (Richard Mogford)
> 2. Re: Cable (Richard Mogford)
> 3. Re: Cable (Nate Perkins)
> 4. Re: Summer Project : transcoding CHIRP (W Paul Mills)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Tue, 20 May 2014 22:26:57 -0700
> From: "Richard Mogford" <rchrdm@earthlink.net>
> Subject: [chirp_users] Cable
> To: <chirp_users@intrepid.danplanet.com>
> Message-ID: <000501cf74b5$49d2d450$dd787cf0$@earthlink.net>
> Content-Type: text/plain; charset="us-ascii"
>
> I am new to this list and probably am making mistakes that are already well
> known!
>
> I bought a cheap cable running the 2303 chip, which I found later is not so
> good.
>
> The drivers on the supplied CD seem to work OK, but when I go to use CHIRP,
> I get an "Error Occurred" message saying "could not open port COM3: [Error
> 2] The system cannot find the file specified."
>
> Is there anything I can try here, or should I just shop for a better cable?
>
> Richard
>
>
>
> ------------------------------
>
> Message: 2
> Date: Tue, 20 May 2014 22:52:11 -0700
> From: "Richard Mogford" <rchrdm@earthlink.net>
> Subject: Re: [chirp_users] Cable
> To: "'Discussion of CHIRP'" <chirp_users@intrepid.danplanet.com>
> Message-ID: <000e01cf74b8$cfa78320$6ef68960$@earthlink.net>
> Content-Type: text/plain; charset="us-ascii"
>
> Well, I got it working by reading the instructions on the CHIRP web site.
> It suggested downloading a driver from the 409shop.com web site, which I
> did. Amazingly, the cheap (about $4 including shipping) worked!
>
> Richard
>
> -----Original Message-----
> From: chirp_users-bounces@intrepid.danplanet.com
> [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of Richard
> Mogford
> Sent: Tuesday, May 20, 2014 10:27 PM
> To: chirp_users@intrepid.danplanet.com
> Subject: [chirp_users] Cable
>
> I am new to this list and probably am making mistakes that are already well
> known!
>
> I bought a cheap cable running the 2303 chip, which I found later is not so
> good.
>
> The drivers on the supplied CD seem to work OK, but when I go to use CHIRP,
> I get an "Error Occurred" message saying "could not open port COM3: [Error
> 2] The system cannot find the file specified."
>
> Is there anything I can try here, or should I just shop for a better cable?
>
> Richard
>
> _______________________________________________
> chirp_users mailing list
> chirp_users@intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>
>
>
> ------------------------------
>
> Message: 3
> Date: Tue, 20 May 2014 22:10:31 -0800
> From: Nate Perkins <perkins.nc@gmail.com>
> Subject: Re: [chirp_users] Cable
> To: Discussion of CHIRP <chirp_users@intrepid.danplanet.com>
> Message-ID: <2F696FA0-8CF9-4DD5-82F6-2EBF6873EC93@gmail.com>
> Content-Type: text/plain; charset=us-ascii
>
> I would suggest just tossing the idea of using whatever driver you got on the supplied CD. I ordered a cable and disc set off of Amazon, threw the disc out, downloaded everything off of CHIRP, plugged in my cable, and it went flawless. Not one hitch. This was a Baofeng UV-82. CHIRP rocks!
>
>
> Nate, KL3NP
> Nome, Alaska
>
> On May 20, 2014, at 9:26 PM, Richard Mogford wrote:
>
> > I am new to this list and probably am making mistakes that are already well
> > known!
> >
> > I bought a cheap cable running the 2303 chip, which I found later is not so
> > good.
> >
> > The drivers on the supplied CD seem to work OK, but when I go to use CHIRP,
> > I get an "Error Occurred" message saying "could not open port COM3: [Error
> > 2] The system cannot find the file specified."
> >
> > Is there anything I can try here, or should I just shop for a better cable?
> >
> > Richard
> >
> > _______________________________________________
> > chirp_users mailing list
> > chirp_users@intrepid.danplanet.com
> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>
>
>
> ------------------------------
>
> Message: 4
> Date: Wed, 21 May 2014 08:34:46 -0500
> From: W Paul Mills <AC0HY@WPMills.com>
> Subject: Re: [chirp_users] Summer Project : transcoding CHIRP
> To: chirp_users@intrepid.danplanet.com
> Message-ID: <537CAB76.9090209@WPMills.com>
> Content-Type: text/plain; charset=ISO-8859-1
>
> Not exactly true. With Windows 8 Prolific has announced that certain
> common chips will not be supported at all, and they seem to be getting
> better at preventing the old drivers from working. I have a genuine
> ICOM cable that recently fell victim to this.
>
> On 05/20/2014 10:54 AM, Niklas Johnson wrote:
> > Its wrong only if you have a 'counterfeit' Prolific chip, the most
> > recent driver revisions that Prolific themselves provided to
> > Microsoft detects and disables the non-genuine variants. Prolific
> > is protecting their market share and IP, and Microsoft was
> > providing a certified manufacturer supplied driver.
> >
> >
> > On Tue, May 20, 2014 at 8:41 AM, Pete Mackie <pete@seaquest.com
> > <mailto:pete@seaquest.com>> wrote:
> >
> > Except starting with Mac OS X Mavericks Apple is providing an O/S
> > built in USB to serial driver. I am using the Apple provided USB
> > to serial driver with CHIRP with zero problems.
> >
> > Windows has provides an O/S built in USB serial driver. The
> > dilemma is the stupid Microsoft thinks they should automatically
> > provide the latest O/S built in USB serial driver. And that is
> > absolutely the wrong thing to do if you are using a Prolific USB /
> > serial cable.
> >
> > Pete
> >
> > On May 20, 2014, at 8:17 AM, Andrew <ziltro@ziltro.com
> > <mailto:ziltro@ziltro.com>> wrote:
> >
> >>
> >> The drivers for certain USB/serial adapter cables will still be
> >> required, and they seem to be the main thing causing problems on
> >> Windows and Mac OS.
> >>
> >
> >
> > _______________________________________________ chirp_users mailing
> > list chirp_users@intrepid.danplanet.com
> > <mailto:chirp_users@intrepid.danplanet.com>
> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> >
> >
> >
> >
> > --
> >
> > Best regards,
> >
> > Niklas Johnson / Tech Rugged Radios 951 E. Grand Avenue Arroyo
> > Grande, CA 93420 toll free (888) 541-7223 local (805) 541-1696
> >
> > Follow Rugged Radios at: Rugged Radios
> > <http://www.ruggedradios.com/> Facebook
> > <http://www.facebook.com/rugged.radios> Instagram
> > <http://instagram.com/ruggedradios> YouTube
> > <http://www.youtube.com/ruggedradios> Twitter
> > <https://twitter.com/ruggedradios>
> >
> >
> > _______________________________________________ chirp_users mailing
> > list chirp_users@intrepid.danplanet.com
> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> >
>
>
> --
> /*************************************************
> * Amateur Radio Station AC0HY *
> * W. Paul Mills SN807 *
> * Assistant EC Alpha-1 ARES Shawnee/Wabunsee, KS *
> * President Kaw Valley Amateur Radio Club *
> *************************************************/
>
>
> ------------------------------
>
> _______________________________________________
> chirp_users mailing list
> chirp_users@intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>
>
> End of chirp_users Digest, Vol 65, Issue 16
> *******************************************

_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users