Get your cable from RT SYSTEMS and it WILL WORK ! Best cables on the market.
JOCK KC6IIH Sent from my Samsung Galaxy Tab®|PRO
-------- Original message -------- From: Amnon Zohar amnon.zohar@gmail.com Date:01/24/2016 11:41 PM (GMT-08:00) To: sparks4151@aol.com,Discussion of CHIRP chirp_users@intrepid.danplanet.com Subject: Re: [chirp_users] cable for kenwood th-f7
Easier but you need to make sure the prolitic driver is not updated from ver 3,2,0,0! Building a cable solves the issue
בתאריך 25 בינו' 2016 2:44 AM, "W2ZDP via chirp_users" chirp_users@intrepid.danplanet.com כתב: Thanks for the tip, sounds much easier !!
-----Original Message----- From: IW2GJV via chirp_users chirp_users@intrepid.danplanet.com To: chirp_users chirp_users@intrepid.danplanet.com Sent: Sun, Jan 24, 2016 3:09 pm Subject: Re: [chirp_users] cable for kenwood th-f7
Has anyone built an interface for an Icom IC-T7H, I've had one for years and
programming it from the key pad is OK, just thought there might be something
even easier
W2ZDP
why built a cable, i used the low cost cable for BAOFENG, work well, used the
original kenwood program or CHIRP .
i used this cable into the kenwood th-f7
bst 73 de Rudy - IW2BSF
_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com