Easier but you need to make sure the prolitic driver is not updated from ver 3,2,0,0! Building a cable solves the issue
Thanks for the tip, sounds much easier !!
-----Original Message-----
From: IW2GJV via chirp_users <chirp_users@intrepid.danplanet.com>
To: chirp_users <chirp_users@intrepid.danplanet.com>
Sent: Sun, Jan 24, 2016 3:09 pm
Subject: Re: [chirp_users] cable for kenwood th-f7
Has anyone built an interface for an Icom IC-T7H, I've had one for years and
programming it from the key pad is OK, just thought there might be something
even easier
W2ZDP
why built a cable, i used the low cost cable for BAOFENG, work well, used the
original kenwood program or CHIRP .
i used this cable into the kenwood th-f7
bst 73 de Rudy - IW2BSF
_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com