Hi Dan,
Again thanks for the reply.
CHIRP uses COM3, which works well when cloning my Icom 2200H and UV-3A Yes, the driver only appears when the USB cable is plugged in, remove it and the driver goes away. Ideas?
73, Mike
On Thu, Dec 15, 2011 at 9:26 AM, Dan Smith dsmith@danplanet.com wrote:
Attached is debug log as per your instructions.
Hmm, that looks like it's getting absolutely nothing from the radio after ten seconds. Remind me, which port are you choosing in CHIRP when you start the download?
If you look in Device Manager, under ports, you should see a new port show up when you plug in your cable and go away when you unplug it. Are you seeing this behavior?
-- Dan Smith www.danplanet.com KK7DS _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users