Hi Dan,
Again thanks for the reply.
CHIRP uses COM3, which works well when cloning my Icom 2200H and UV-3AYes, the driver only appears when the USB cable is plugged in, remove it and
the driver goes away. Ideas?
73, Mike
On Thu, Dec 15, 2011 at 9:26 AM, Dan Smith
<dsmith@danplanet.com> wrote:
> Attached is debug log as per your instructions.
Hmm, that looks like it's getting absolutely nothing from the radio
after ten seconds. Remind me, which port are you choosing in CHIRP when
you start the download?
If you look in Device Manager, under ports, you should see a new port
show up when you plug in your cable and go away when you unplug it. Are
you seeing this behavior?