Thank Jim...I have the v3.2.0.0 version install. Don't know what's going on.
On Mon, Oct 12, 2020 at 3:01 PM Jim Unroe rock.unroe@gmail.com wrote:
On Mon, Oct 12, 2020 at 4:52 PM Michael D. Krochter mkrochta@gmail.com wrote:
I have a Yaesu 857 and I have the Prolific USB to Serial comm port
cable. I have installed the old driver. It did work with old versions of Chirp. Now it's now working. Any ideas would be appreciated.
73 Mike K.
Hi Mike,
Nothing would have changed in CHIRP that would have affected this. Assuming that you are running Windows, I would expect that Windows updated the driver. This happened to me about a week ago. All I had to do (and it should be the same for you) is to use the Device Manager application and re-select the older version (v3.2.0.0).
I keep several Prolific drivers installed and switch between them at will for testing.
Jim KC9HI _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Michael Krochter at mkrochta@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com