On Mon, Oct 12, 2020 at 4:52 PM Michael D. Krochter <mkrochta@gmail.com> wrote:
>
> I have a Yaesu 857 and I have the Prolific USB to Serial comm port cable. I have installed the old driver. It did work with old versions of Chirp. Now it's now working. Any ideas would be appreciated.
>
> 73
> Mike K.

Hi Mike,

Nothing would have changed in CHIRP that would have affected this.
Assuming that you are running Windows, I would expect that Windows
updated the driver. This happened to me about a week ago. All I had to
do (and it should be the same for you) is to use the Device Manager
application and re-select the older version (v3.2.0.0).

I keep several Prolific drivers installed and switch between them at
will for testing.

Jim KC9HI
_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Michael Krochter at mkrochta@gmail.com
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com