So it is not limited to linux but to windows as well!?
בתאריך שבת, 7 במרץ 2020, 19:22, מאת Terry Hunt terry@mylakeroyale.com:
Thanks Jim, that would make since. I appreciate the reply and confirmation.
Terry
*From:* chirp_users-bounces@intrepid.danplanet.com < chirp_users-bounces@intrepid.danplanet.com> on behalf of Jim Unroe < rock.unroe@gmail.com> *Sent:* Saturday, March 7, 2020 10:32 AM *To:* Discussion of CHIRP chirp_users@intrepid.danplanet.com *Subject:* Re: [chirp_users] QYT-KT8900D
On Sat, Mar 7, 2020 at 9:14 AM Terry Hunt terry@mylakeroyale.com wrote:
I have several radios that I program using CHIRP, running Linux the
manufacture software isn't usually compatible., so thank you to everyone that works so hard to make CHIRP a success. I have an 8900D that seems to program perfectly with one exception. This radio has four monitor slots on the front panel. When programming, the first two work great, number 3 and 4 however do not. Some settings like choosing the channel or frequency mode do work, but setting a default channel on them do not, they always come up to channel 0 after the restart. Does anyone else have this issue?
Thanks, Terry
Hi Terry,
This is a bug in the hardware that has been present since the first units began shipping in 2017.
Jim KC9HI _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com
https://nam04.safelinks.protection.outlook.com/?url=http%3A%2F%2Fintrepid.da... This message was sent to Terry at terry@mylakeroyale.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to amnon at amnon.zohar@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com